Bass the way it was meant to be
High-performance subwoofers and speakers from Stereo Integrity, built since 1999 and available in India through Avenue Sound, authorized distributor.

Engineered For Accurate, Effortless Bass
What sets Stereo Integrity subwoofers apart, in the brand's own engineering terms.
Simulated, then measured
The 24-inch drivers are designed using FEA simulation and CAD software, with Klippel verification of the final driver. The SQL series was fully designed in FEA and verified through multiple Klippel test sessions.
Inductance under control
Shorting rings, faraday rings and bifilar copper voice coils lower and linearise inductance. The HS-24 uses three internal shorting rings, for accuracy and tightness of bass.
Long linear excursion
The HS-24 and HST drivers are capable of 40 mm of one-way linear travel (80 mm total), so large, clean bass doesn't depend on a huge enclosure.
Hand-built in North Carolina
The IB-24 and HST subwoofers are hand-built in North Carolina, where Stereo Integrity designs its drivers.
Stereo Integrity Subwoofer Lines
From 11-inch shallow drivers to 24-inch flagships.

HS-24
A 24-inch subwoofer with a bandwidth potential of 5 Hz to 1,000 Hz, a quad-stacked Y35 ferrite motor, cast aluminium basket and carbon fibre and Kevlar sandwich cone. Reaches a 0.707 alignment in a compact 8 ft³ sealed enclosure.
24″ · 40 mm one-way Xmax · 8 ft³ sealed

HFS-24
The most compact 24-inch solution in the range: a 5″ copper voice coil, neodymium cup XBL² motor and Carbon Fibre/Rohacell/Kevlar sandwich cone, with a mounting depth of only 8.75″.
24″ · 8.75″ mounting depth · 80 mm peak travel

IB-24
A 24-inch driver designed specifically for infinite baffle applications, with a Qts of 0.70, 330 sq in of cone area and a frequency response of 5 Hz to 500 Hz. Dual 2 Ω or dual 4 Ω.
24″ · 38 mm one-way Xmax · Infinite baffle

SQL 12 / SQL 15
Sound Quality Loud: an SGLC overhung motor with a 2.75″ copper voice coil, faraday ring and dual 8⅜″ Nomex spiders. A solid sound-quality foundation, with deep output in reserve.
12″ and 15″ · FEA designed, Klippel verified

HST-15 / HST-18
Designed for big bass from very small enclosures: triple-stacked 250 mm motors with three shorting rings, bifilar copper coils, and Carbon Fibre sandwich cones.
15″ and 18″ · 40 mm one-way Xmax

BM-11
A shallow 11-inch subwoofer with a flat Carbon Fibre sandwich diaphragm and ten-piece neo motor. Approved for infinite baffle use and small sealed enclosures of 0.30 to 0.75 ft³.
11″ · 3.0″ mounting depth · 500 W RMS
Specifications from stereointegrity.com. Availability varies by model; ask us for current lead times.
Which Stereo Integrity Subwoofer Is Right For You?
We'll recommend a driver once we understand your room. Here's where most conversations start.

Room for a sealed enclosure
Full-range, single-digit bass from one driver. The HS-24 works in a sealed box smaller than a 28″ cube.
Typical choice: HS-24

Limited depth
When mounting depth is the constraint, the HFS-24 brings 24-inch bass at 8.75″ deep, and the BM-11 needs just 3.0″.
Typical choice: HFS-24, BM-11

Infinite baffle installs
For drivers mounted into a wall or baffle with a large space behind, the IB-24 is designed for exactly this application.
Typical choice: IB-24

Conventional sizes
Stereo Integrity's best performance-to-cost subwoofer, in 12″ and 15″ sizes.
Typical choice: SQL 12 / SQL 15

Very small enclosures
Long-stroke, high-motor-force drivers built for massive output from small boxes.
Typical choice: HST-15 / HST-18
Stereo Integrity Questions, Answered
Who is Stereo Integrity?
Stereo Integrity has been building high-performance speakers and subwoofers since 1999. It designs and manufactures subwoofers, component speakers and other audio gear, and many designs come directly from conversations with enthusiasts.
How large an enclosure does the HS-24 need?
The HS-24 reaches a 0.707 alignment in a sealed enclosure of 8.0 ft³, smaller than a 28″ cube. Stereo Integrity also offers an internally braced MDF sealed flat-pack enclosure for the HS-24 and HFS-24.
Do I need a very large amplifier?
Not necessarily. Stereo Integrity notes that power handling is not a power requirement; its SQL subwoofers perform well with 250 to 500 watts. Running more than rated power is not recommended and voids the warranty.
Are the 24-inch subwoofers built to order?
Yes. Stereo Integrity lists a build time of 3 to 4 weeks for the HS-24, HFS-24 and IB-24, plus crating and freight. We'll confirm current timelines when you enquire.
Hear Bass The Way It Was Meant To Be
Tell us about your room and system, and we'll help you choose the right Stereo Integrity subwoofer. Visit our experience centre in Seawoods, Navi Mumbai or Devanahalli, Bengaluru.
Stereo Integrity enquiries
Tell us about your system and we’ll help you explore the right Stereo Integrity solution.
WhatsApp us about Stereo Integrity